This 2015 BMW 5 Series arrived with excessive oil consumption and rough idle. After thorough diagnostics, we identified worn timing chain components and valve seal deterioration. The engine required complete disassembly for proper repair.

We replaced the timing chain kit, valve seals, and piston rings. All components were measured and checked against manufacturer specifications. The cylinder head received professional machining to ensure proper sealing. After reassembly, the engine underwent break-in procedure and multiple test drives to verify performance.

Front-end collision damage required extensive bodywork on this 2018 Mercedes C-Class. The impact affected the bonnet, bumper, both headlights, and caused minor frame misalignment. We coordinated with the insurance company and provided detailed damage assessment.

Using laser measuring equipment, we straightened the frame to factory specifications. All damaged panels were replaced with genuine Mercedes parts. The paint shop used computerized colour matching to achieve perfect finish. Final quality check included headlight alignment and comprehensive road test.

Intermittent electrical faults can be challenging to diagnose. This 2017 Audi A4 had multiple dashboard warnings appearing randomly, affecting various systems including parking sensors, adaptive cruise control, and climate control.

We used Audi-specific diagnostic software to monitor live data and stored fault codes. Testing revealed a faulty gateway control module and corroded wiring in the engine bay. After replacing the module and repairing the wiring harness, we updated all control unit software to current versions. The vehicle now operates without any warning lights or system malfunctions.

Regular maintenance keeps vehicles running reliably. This 2016 Range Rover Sport reached its 60,000-mile service interval, requiring comprehensive inspection and replacement of wear items according to Land Rover specifications.

We performed oil and filter changes using approved fluids, replaced spark plugs and air filters, and changed brake fluid. Suspension inspection revealed worn front bushings which we replaced. The vehicle received four-wheel alignment and full brake system check. We provided the owner with detailed service report and recommendations for future maintenance.

Turbocharger failure typically shows as loss of power and excessive smoke. This 2014 VW Golf GTI experienced gradual performance decline over several weeks. Diagnostics confirmed turbo bearing failure and oil contamination in the intake system.

We fitted a genuine VW replacement turbocharger with new oil feed and return lines. The intercooler system was thoroughly cleaned to remove oil residue. After installation, we performed boost pressure tests and multiple road tests under various load conditions. The vehicle now delivers full power with improved throttle response.

Rust damage requires proper repair to prevent recurrence. This 2012 Ford Focus had corrosion around both rear wheel arches and lower sills. Surface treatment would only provide temporary solution, so we recommended complete panel replacement.

We cut out all corroded metal and welded in new steel panels. All repair areas received rust protection treatment before primer and paint. The entire exterior was resprayed in original Ford colour for uniform finish. We applied ceramic coating for additional protection against future corrosion and environmental damage.